On this page:
There are several steps to importing a road vehicle:
Obtain a Vehicle Import Approval (VIA) from the Department of Infrastructure and Regional Development (Infrastructure) prior to shipping your vehicle/s. Phone: 1800 815 272 (Australia only), or
+61 2 6274 7444 (International callers), Fax
+61 2 6274 6013, email
email@example.com. Further information can be obtained by visiting the Importing Vehicles into Australia webpage at
- Pay customs duty, Goods and Services Tax (GST) and luxury car tax (LCT) where applicable and obtain clearance from Customs control the port of entry.
- Obtain quarantine clearance from the Department of Agriculture after the road vehicle has arrived at the port of entry. For more information visit the
Department of Agriculture website.
A road motor vehicle as defined in the
Motor Vehicle Standards Act 1989 (MVSA) is a vehicle designed solely and principally for the transport of people, animals or goods, or a partly completed road motor vehicle. A road trailer is defined as a vehicle or equipment fitted with wheels, that is without motive power and is designed to be attached to and towed behind a road motor vehicle. Before importing any vehicle, including disassembled or partly completed road vehicles you should contact Infrastructure. Further information can be found at:
To gain clearance from Customs control for an imported road motor vehicle you must hold a valid VIA for that road motor vehicle. It is an offence under the MVSA to import, sell or present new or used imported road motor vehicles to the Australian market for the first time unless those road motor vehicles meet the National Standards.
Motor vehicles that are designed solely and principally for off-road use or those not permitted to be used on public roads are not road motor vehicles and are not prohibited from importation. These are referred to as non-transport equipment or off-road vehicles. Such vehicles include motorised mobility wheelchairs that meet the definition set in the Motor Vehicles Standards Road Vehicles Determination 2003 and also include power-assisted pedal cycles, off-road motorbikes, All Terrain Vehicles and Self Balancing Personal Transportation Devices (Segway type) designed solely for off-road use.
As the importation of off-road vehicles is not prohibited by the MVSA 1989, a VIA is not required under that legislation. However, in order to determine that such vehicles are not road motor vehicles, the Department requires that Infrastructure conduct an assessment of the vehicle and provide documentation to that effect. This documentation is similar to a VIA and will allow for the release of your vehicle from customs control. For further information, visit the Importing Vehicles into Australia webpage at
What to do
You may make arrangements to transport your road vehicle to Australia
after you are issued with a valid VIA. Please note that it is an offence to ship your road vehicle prior to obtaining a VIA. Once you have initiated transport of your road vehicle to Australia you may lodge an import declaration with the Department either:
- electronically; or
- by document at a Department of Immigration and Border Protection office; or
- you may use the services of a licensed customs broker to deal with the Department's requirements on your behalf.
Your road vehicle may be entered into:
- home consumption; or
- a licensed warehouse.
Duty/GST and other charges must be paid when your road vehicle is entered for home consumption. LCT must be paid or deferred if your road vehicle has a customs value above the LCT threshold or the fuel efficient LCT threshold, unless an exemption applies. Information relating to GST and LCT can be found at the Australian Taxation Office website:
If your road vehicle has a value below the import entry threshold (AUD1000) it may be cleared by the Department by lodging a self-assessed clearance (SAC) declaration.
AVIA is required regardless of the value of the road vehicle.
Once all duty, taxes and other charges are paid (if applicable), and Department of Immigration and Department of Agriculture requirements are met, an authority to deal (ATD) will be issued for your road vehicle to be delivered into home consumption. All ATDs for road vehicles are issued subject to the condition that you have a valid VIA to take delivery of your road vehicle into home consumption.
Prior to making a decision to import a road vehicle you should take into account the likely costs you may incur during the importation process such as:
- freight and insurance (for the transport of the goods to Australia);
- customs duties, GST and LCT, if applicable;
- storage and delivery charges;
- logistic services providers' charges;
- customs brokers' charges;
- entry processing charges;
- steam cleaning for quarantine purposes;
- other wharf and transport charges; and
- any costs involved in having your road vehicle meet State or Territory registration and insurance requirements.
Delivery of your road vehicle into home consumption will only be authorised where Department of Immigration and Border Protection and Department of Agriculture requirements are met.
What not to do
It is important that you do not initiate importation of your road vehicle until
after a VIA is issued to you. Without a valid VIA you should
NOT make arrangements to transport your road vehicle to Australia.
If your road vehicle is shipped to Australia before you have received a VIA, and/or your road vehicle arrives before your application is processed, you may incur significant storage costs and other charges (not Department of Immigration and Border Protection charges) until the Department clears your road vehicle.
The Department will only issue an ATD when you have a valid VIA for your road vehicle. The owner of any imported road vehicle that is not or will not be issued with a VIA may incur significant storage costs until the owner makes arrangements for the road vehicle to be:
- exported at the owner's expense; or
- destroyed at the owner's expense.
Destruction will take place under the Department's supervision.
Vehicles with Air-conditioners or a Refrigeration System
Road vehicles (and other equipment such as boats, caravans, etc.) equipped with an air-conditioner or a refrigeration system may require an import licence under the
Ozone Protection and Synthetic Greenhouse Gas Management Act 1989. This Act controls the manufacture, import and export of ozone depleting substances (ODS) and synthetic greenhouse gases (SGG) in Australia. These substances are listed in Schedule 10 of the
Customs (Prohibited Imports) Regulations 1956. It is an offence to import controlled ODS/SGG equipment without a licence.
Before importing a road vehicle with an air-conditioner or refrigeration system, you must find out the type and quantity of gas contained in the equipment (if gassed) so that you can complete licensing and reporting requirements that are detailed at the Department of Environment (DoE) website. Specific requirements are available at:
You may not need to apply for an ODS/SGG equipment licence if the road vehicle is kept by you or a member of your household, and:
- the road vehicle is owned by you (the importer) for at least 12 months prior to importation and is principally for your private use; or
- the air-conditioning or refrigeration system is degassed prior to being shipped to Australia.
If you claim one of these exemptions you may be required to present documentary evidence to support your claim. These records should be kept for audit purposes.
Vehicles with components made of asbestos
Under Regulation 4C of the
Customs (Prohibited Imports) Regulations 1956, the importation of goods containing asbestos is prohibited in almost all circumstances. As a result, it is an offence to import motor vehicles containing components that include asbestos. Australia prohibits the use of asbestos in all vehicle parts including gaskets, brake pads and clutch plates. The Department is actively targeting imported goods at risk of asbestos contamination and you should be aware that there may be lengthy delays in releasing motor vehicles that are suspected of asbestos contamination. More information is available in ACN 2010/45
Importation of asbestos or goods containing asbestos.
You may be required to demonstrate that you have taken steps prior to importation to ensure your goods are free from asbestos and you should supply documentary evidence of this to your broker. Options include:
- testing a sample of high risk components at an independent National Association of Testing Authorities (NATA) accredited laboratory;
- engaging a qualified mechanic to remove the brakes, clutch, exhaust gasket and any other high risk parts and importing the vehicle without these components; or
- engaging a qualified mechanic to replace the brakes, clutch, exhaust gasket and any other high risk parts with components certified to be free of asbestos.
Prior to a road vehicle being released from customs control, the Department of Agriculture inspects all road vehicles for cleanliness on arrival in Australia.
If you are importing a used road vehicle you are required to lodge a Quarantine Entry at a Department of Agriculture regional office. You should also contact the Department of Agriculture regional office in the port at which your road vehicle will be arriving, to arrange an inspection. You are responsible for all Department of Agriculture charges. Further information can be found at
For information on how the customs value of imported goods is determined please refer to the
Valuation of Imported Goods Fact Sheet.
For additional information on how the customs value of your imported road vehicle is determined please refer to the
Guide to the Valuation of Imported Road Vehicles
Customs duty, GST, LCT
Duty rates payable are determined by the tariff classification for your goods. The
Customs Tariff Act 1995 (the Tariff) provides the tariff classifications, duty rates, interpretive rules and information on preference schemes, other concessions and exemptions that may apply to your goods. Duty is payable on the customs value of the goods.
GST applies to most imported goods. There are a few exemptions from the GST, one being road vehicles for disabled persons, subject to certain conditions. If no exemptions apply, GST is applied at 10% of the value of the taxable importation (VoTI).
For imported road vehicles the VoTI is the sum of:
- the customs value (CV);
- any duty payable; and
- the amount paid or payable to transport the goods to Australia and to insure the goods for the transport (T&I).
LCT applies to road vehicles (except motor cycles or similar vehicles) that are:
- designed to carry a load of less than two tonnes and fewer than nine passengers; and
- above a certain value.
The definition of a road vehicle for LCT purposes includes limousines regardless of the passenger carrying capacity. The value above which the LCT becomes payable is the LCT threshold. The LCT threshold is a GST inclusive value which, for the 2015/16 financial year, is set at $63,184. (NB: Customs Value can be an amount less than the LCT threshold figure, as shown in the example below).
LCT does not apply to a car above the LCT threshold if it is a commercial vehicle that is not designed for the principal purpose of carrying passengers. Further information about vehicles that are not subject to LCT can be found on the ATO website at
The LCT rate is 33 % (commencing 1 July 2008, prior to that date the rate was 25%). While the LCT threshold is GST-inclusive, LCT is only payable on the GST-exclusive amount which exceeds the threshold value.
An example of how the LCT is applied is shown below:
Imported New Luxury Car
Customs Value (CV)
Customs Duty = 5% x CV
= 0.05 x 56,000
Transport and Insurance (T&I)
= 56,000 + 2,800 + 1,500
GST = 10% x VoTI
= 0.10 x 60,300
|Luxury car value (LCV) = (GST+VoTI)|
= 6,030 + 60,300
LCT = (LCV-LCT threshold) x 10/11 x 0.33
= 66,330-63,184 x 10/11 x 0.33
TOTAL PAYABLE (Duty + GST + LCT)
2,800 + 6,030 + 943.80
Fuel efficient luxury cars with a luxury car value (VoTI plus GST) under the Fuel Efficient Vehicle (FEV) limit of $75,375 for the 2015-16 financial year are not subject to LCT. Further information can be found by accessing Australian Customs Notice 2009/41
Luxury Car Tax in the Integrated Cargo System - Update.
Please note: You do not need to make any calculations regarding duty, GST or LCT (if applicable) liabilities. When your import declaration is processed the Department will provide you with an Outstanding Payment Advice. This Advice will show all amounts payable to the Department relating to your imported goods.
Tourists and Temporary Residents
Section 162 - Import Declaration Required/VIA Required
As a tourist or temporary resident, you may bring a road vehicle to Australia for a period of up to 12 months without payment of duty and taxes,
provided a VIA is obtained prior to your importation. Your road vehicle must be subsequently exported from Australia within the approved time limit. All fittings and accessories imported with the road vehicle must also be exported with the same road vehicle.
Approval for temporary imports is granted under
Section 162 of the
Customs Act 1901 (the Act). Goods that qualify as temporary imports can be imported under:
- a security or undertaking, equal to the amount of duty and GST and if applicable, LCT that would be payable on importation. The security may be in the form of cash or a bank guarantee.
Under provisions set out in the Act, on application, the Comptroller-General of Customs may extend the period of temporary importation. Applications to extend this period must be made prior to the expiry of the temporary importation period.
If your road vehicle is not exported within the approved time limit, you will forfeit the security. This also applies where the road vehicle is lost or stolen and therefore unable to be exported when required.
If you remain in Australia and you decide to keep your road vehicle with you, you may apply to have your import declaration amended. This will create a duty and tax liability which you are required to pay to finalise your importation. To organise a refund of the security you will need to advise the Department that you have amended your import declaration and paid the duty and GST.
Section 162A - Import Declaration
Under section 162A of the Act commercial samples, professional equipment, scientific equipment and goods for display or use at exhibitions, fairs, meetings or similar events can be imported under:
- an ATA carnet (Admission Temporaire/Temporary Admission) issued by Chambers of Commerce under the ATA Convention or the Convention on Temporary Admission (otherwise known as the Istanbul Convention).
Section 162A also provides for a private road vehicle to be imported under:
- a CPD (Carnet de Passages En Douanes) carnet issued by an overseas organisation which has a reciprocal arrangement with the Australian Automobile Association (AAA); and for
- the specified period.
A CPD carnet allows for the temporary admission of your road vehicle without the payment of duties or taxes and without the requirement for a VIA. For a CPD carnet, approval is required from:
- the Australian guaranteeing body (AAA);
- the Department of Immigration and Border Protection; and
- the carnet issuing body overseas.
Further information can be obtained from the AAA website at:
You may extend the period of importation provided under a CPD carnet by submitting an application to the relevant Guarantee Association.
An extension must be approved by the Comptroller-General of Customs prior to the expiry of the original approval.
Importing a Second-hand Road Vehicle - Import Declaration and VIA is Required
Provided you obtain a VIA prior to importing a second-hand road vehicle, you may make use of the available concessional treatment under Item 37 to Schedule 4 of the Tariff which exempts an importer from the special duty of $12,000 that is applied to second-hand road vehicles. However, your road vehicle may still be subject to an ad valorem rate of duty.
Returned Australian goods - Import Declaration and VIA is Required
A VIA is required for all returning Australian road vehicles including road vehicles that have been modified.
You may make use of the available concessional treatment under Items 17 and 20 to Schedule 4 of the Tariff as returned Australian goods provided a VIA is obtained and your road vehicle meets one of the customs By-laws associated with Item 17 or Item 20
Item 17 may be used for unaltered road vehicles returning to Australia.
Item 20 may be used for repaired or renovated road vehicles returning to Australia.
A VIA is required where:
- a road vehicle was exported from Australia and is being imported;
- a road vehicle is returning to Australia that was previously registered in Australia;
- a road vehicle was purchased overseas and has an Australian compliance plate fitted; and
- a road vehicle was manufactured in Australia.
Road Vehicle Kits including Disassembled or PartlyDisassembled RoadVehicles - Import Declaration and VIA is Required
Importations of road vehicle kits including disassembled or partly disassembled road vehicles are subject to an assessment made by Infrastructure.
If you wish to import a road vehicle kit, you must submit a full application to Infrastructure with all the relevant information. Infrastructure will assess the application and determine if a VIA is required. If a VIA is not required for your road vehicle kit, Infrastructure will advise you in writing.
It is important to note that State and Territory registration authorities may not register a reassembled road vehicle or a road vehicle kit for use on public roads without a valid VIA.
Road Vehicle Parts
Road vehicle parts do not require a VIA from Infrastructure.
However, for both Customs Tariff purposes and for the purposes of obtaining a VIA, a road vehicle is not considered to be parts just because it is unassembled, dismantled or incomplete. Before importing any vehicle, including disassembled or partly complete road vehicles you should contact Infrastructure.
Where a road vehicle purchased overseas is cut in two halves or more (to be assembled in Australia) for importation on separate shipments to Australia, the importer may be in breach of the Act for non-compliance of entry of the goods. This is because the purchased road vehicle may form part of a bulk order. It is strongly recommended that if you do intend to import an unassembled, dismantled or incomplete road vehicle you seek advice from the Department of Immigration and Border Protection and the Department of Infrastructure prior to arranging importation.
If a road vehicle assembly or component being imported bears a road vehicle identification chassis number and is to be reassembled for use on public roads, then a VIA is required. It is important to note that State and Territory registration authorities may not register a reassembled road vehicle for use on public roads without a valid VIA.
Tariff Classification Guide dealing with incomplete vehicles,
The classification of partially assembled or partially disassembled motor vehicles under IR2(a).
Road Vehicle Registration
The Department has no control or authority over the registration and insurance requirements for road vehicles in Australia.